Description
Klebfix cyanoacrylate adhesive.
For bonding metal, plastic and rubber parts with and to each other in a matter of seconds.
- Clever special closure.
- Precise dispensing.
- The tips do not become clogged.
- Bonds in seconds.
- Immediate further processing possible.
- Fast repairs.
- Simple designs without additional fastening materials possible.
- High level of resistance to ageing and climatic conditions.
- Solvent and silicone-free.
NSF registered, class P1, reg. no. 151993.
NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water.
Notice!
- It is advisable to wear safety gloves and safety goggles.
- If surfaces are too dry or acidic, this will delay or prevent hardening, while higher levels of moisture and alkaline surfaces will have an accelerating effect.
- Due to the vapour pressure of the liquid adhesive, slow curing excess product around the adhesive area may result in a white deposit (blooming effect). These are adhesive vapours that are hardening. These can be removed with e.g. isopropanol or acetone. However, it is important to note that the surfaces of the parts to be cleaned are also resistant to these solvents. Blooming can be prevented/reduced by using the adhesive economically and ensuring sufficient air humidity and ventilation in the work area.
